Boilers: The cost of installing a boiler
The cost of installing a new or replacement boiler is often more expensive than the boiler itself, so you need to know what to expect before you contact a qualified boiler engineer. This isn't a job you can do yourself to cut costs, unless you're a Gas Safe registered installer.
Once you have picked the most reliable boiler from our boiler reviews, check the installation price guide below to make sure that you're getting value for money.
Boiler installation costs
Boiler installation costs vary enormously, depending on how much work is required, the parts needed and their availability, where you live and who you employ for the job.
Following the boiler scrappage scheme in 2010, which allowed those with an inefficient boilers to claim back cash to help them pay for a new boiler, a freedom of information request revealed energy companies were charging, on average, around a third more than independent traders.
We've teamed up with the Association of Plumbing and Heating Contractors (APHC) to show you the typical scenarios you might face and how much you should expect to pay for installation only.
Replacing an existing gas condensing combi boiler in the same position as the previous one
This job involves removing and disposing of the previous boiler before installing the new one.
Expect to pay Around £540 - £660
If your heating system is very old, it may need a mechanical flush - which costs around £510. This involves cleaning the heating system by adding chemicals which are flushed through the pipes with an external pump.
Replacing a gas non-condensing boiler with a condensing one, in the same position
Before installing a combi boiler, the fitter will need to check the gas supply and position of the flue. This may need to be removed or replaced to fit the new boiler.
Expect to pay Around £640 to £770
Moving pipes will add around £200 to £300 to the cost. Very old systems may require a mechanical flush before installation.
Installing a new gas condensing boiler in a different location and upgrading your heating system by adding radiator valves and changing the controls
This involves complex plumbing work, such as adding a condensate drain and routing the flue.
Expect to pay Around £1,140 to £1,440
The system will also need a chemical flush, which involves adding cleaning chemicals to the heating system to remove debris. This costs around £200.
Trading in a gas heat-only boiler for a condensing combi boiler
The fitter will need to convert your system from an open-vented setup to a sealed one. This will involve removing obsolete equipment, such as the hot water storage cylinder, cold water storage tank and the feed and expansion tank in the loft. Re-plumbing and adding a condensate drain will also boost costs.
Expect to pay Around £1,440 for a basic job
You may need additional pipe work (around £200 to £300) and a chemical or mechanical flush of your heating system.
Finding a registered installer
Any new gas or oil boiler needs to be fitted by a competent person in accordance with the Building Regulations and Gas Safety (Installation and Use) Regulations.
Gas installations by the Gas Safe Register
The easiest way to ensure this is to employ a Gas Safe registered installer to do it for you. Previously, you would have used a Corgi (Council for Registered Gas Installers) registered installer, but the requirement changed in April 2009.
The Gas Safe website can provide details of registered installers in your area; alternatively, call Gas Safe on 0800 408 5500. Each installer must carry an ID card, which lists the gas work they are qualified to do. Check it covers the work you're expecting and includes the words 'energy efficiency'. You can also check their registration with Gas Safe.
Oil boiler installations
Installation of the following should be carried out by a competent person:
- An oil-fired combustion appliance which has a rated heat output of 100kW or less, and which is installed in a building with no more than three storeys (excluding any basement) or in a dwelling,
- Oil storage tanks and the pipes connecting them to combustion appliances,
- Heating and/or hot water service systems connected to an oil-fired combustion appliance.
Several schemes exist to help you track down a suitable competent person for oil appliances. You can find more details on their websites:
- APHC (Association of Plumbing and Heating Contractors (Certification) Limited 0121 711 5030
- Building Engineering Services Competence Accreditation (BESCA Limited) 0800 652 5533
- NAPIT Registration Ltd 0870 444 1392
- NICEIC Group Ltd 0800 013 0900
- OFTEC (Oil Firing Technical Association Limited) 0845 658 5080