How to wall mount your TV
By Martin Pratt
TVs are getting bigger but living rooms aren't. Sometimes wall mounting is the only option if you don't have space for a hefty media unit.
You can wall mount a TV of any size, though – you just need the right tools, the right mount and the right know-how. In this guide we'll explain the different types of mounts, how to pick the one you need and how to make sure your wall can take the strain. We'll also guide you through the steps for fixing your TV to the wall.
- What sort of wall mount do you need?
- What is VESA?
- Making sure your mount can take the weight
- How much should you spend on a wall mount?
- What tools will you need?
- Step-by-step guide to mounting your TV
- Hiding your cables
- Get someone else to do it
Looking to upgrade to a new TV? Take a look at our top-rated 4K TVs.
There are three basic types of bracket to choose from: fixed, tilt and full motion. Which one you choose depends on where you plan to fix your TV and how much you think you'll need to adjust it.
- Fixed The most basic mounts fix your TV flush to wall. Once it's mounted you won't be able to move the TV at all.
- Tilt These mounts let you angle the screen a few degrees up or down. This is useful if the TV is going to be high on the wall and you want to angle the screen down towards the viewer.
- Full motion These mounts usually have a moveable arm that allows the TV to extend out from the wall and be angled towards the viewer. It's handy if you need to put the mount in a corner where the TV wouldn't be able to sit flush or you just want to have more flexibility in how you arrange your living room.
To make the DIY a bit easier, you can buy mounts with built-in spirit levels. The last thing you want after going through all the effort is a wonky telly.
Once you've chosen what type of wall mount will work best, you need to make sure it's compatible with your TV. Thanks to VESA this is a simple process.
VESA is the Video Electronics Standards Association, and it established a mounting interface standard so you can see easily whether a wall mount is the right fit for your TV.
All VESA-compliant mounts have a measurement in millimetres that tells you whether the holes in the bracket will match up with the holes on the back of your TV. You can check your TV's manual or a product listing online to determine whether a mount is compatible.
When you're shopping for a mount, make sure it supports the size and weight of your TV. Just because the VESA measurements line up it doesn't necessarily mean that the mount can handle your size of TV, so it's worth checking.
You should also make sure the mount is sturdy enough to cope with your TV's weight. Newer TVs are thin and light, but if yours is a bit older then it's probably heavier, too. Check our reviews or your TV manual to see how much it weighs.
The cost of wall mounts can vary enormously – prices can range from £20 all the way up to £160. But if all are VESA-compliant and fit your TV's size and weight, why pay more?
As you might expect, full motion mounts cost more than fixed ones and some pricier ones will mean there's less of a gap between your TV and the wall. Some more expensive brackets have more points of articulation, giving you greater control over exactly how your TV is positioned.
If you get a lot of glare from a window and you know you'll often be adjusting the angle and position of your TV, it's probably worth heading to a shop and asking to try a bracket. If it's stiff and difficult to manipulate it may not be the best choice for you, particularly given that it will only get harder to move when there's an 18kg TV bolted to it.
You've got your mount and your TV. Now, most of what you need you might have knocking around the house. Here are the tools required:
- Drill You'll need the right drill bits: masonry ones if you're mounting the TV onto brickwork and twist bits for anything else.
- Screwdriver You'll need at least one screwdriver to fix the bracket to the back of your TV.
- Spirit level You might not need one of these if there's one in your wall mount already, but it wouldn't hurt to have one handy anyway. You could always download a spirit level app onto your phone if you don't fancy buying one.
- Stud finder The bolts in mounts go deep into your wall to make sure your TV is secure. Use this tool before you drill to make sure you drill into the wooden studs that support hollow walls. You won't need this if you're mounting your TV onto brickwork. Most stud finders will find pipes and wiring, too.
- Tape measure You'll need one of these to make sure the holes are the right distance apart and to measure how high you want the TV to be on the wall.
- Spanner Depending on the mount you have, you may need to secure some of the bolts with a spanner.
1. Check your wall can support your TV
They're getting thinner every year, but TVs aren't exactly lightweight. The average weight of a 55-inch TV in 2018 is 18kg.
Unless you're mounting your TV onto a brick wall you'll need to find the studs. These vertical wooden support beams run along your walls and the gaps between them will either be hollow or packed with insulation, neither of which will be strong enough to hold up your TV. A stud finder will tell you exactly where they are, so you can be sure you're drilling into something solid rather than empty space.
2. Figure out where you want the TV to go on your wall
Once you've got your TV fixed to the wall you aren't going to want to move it again, so make sure you put it in exactly the right place. Ideally, you want three people to do this: two to hold the TV and a third to lounge in an armchair to direct proceedings: 'Higher, lower, a bit to the left, perfect.'
Another option is to get a big sheet of paper and cut out the exact shape and size of your TV and hold that onto the wall instead.
When you're happy with the position, mark the edges and corners with a pencil or tape.
3. Fix the bracket to the wall
Hold the bracket to the wall and mark where the bolt holes are. When you make the holes ensure the bracket is straight using a spirit level.
When you're happy with the bracket's position and that your marks are in the right place you can start drilling. Start by making pilot holes and then use a drill bit that matches the size of the bolts that came with your mount to make the holes.
4. Fit the bracket to your TV
Wall mounts come in two parts – you've already fitted one to the wall and now you can fix the other part to your TV.
Most mounts come with many different sizes of bolts for different TVs, so don't worry if the first few you try don't fit. Once you have the right ones, use them to attach the mount to the four holes on the back of your TV. Some wall mounts also have fastening screws that help secure the TV once both parts of the bracket are connected. Fit those loosely; you'll tighten them further once the your TV's in position.
5. Mount the TV on the wall
You're now ready to put the TV on the wall. We'd recommend plugging all the cables you need into the back of the TV before you do this next step as space may be tight once your TV is flush to wall.
Different mounts will have different mechanisms for attaching the two sections but, generally, the TV bracket will have hooks that slide behind the part of the bracket on your wall.
It's good to have some help here because you don't want to come this far just to drop your TV. Once the two parts are together, tighten the fastening screws to hold everything in place.
The last thing you want after you've gone to all the effort of mounting your TV on the wall is to have a slew of unsightly cables dangling down below it. There are a few options for hiding them and which you choose depends on personal preference, how many cables you have to hide and what wall you're mounting your TV onto.
If you only have a few cables, you can use trunking rather than threading them through your wall. Buy big enough trunking to fit all your wires through and try to get a colour that matches your wall. You can always paint trunking, too.
Trunking may be your only option if you're mounting your TV straight onto masonry or brickwork.
Thread them through your wall
The other option requires a bit more DIY, but it's useful if you have a lot of cables or you don't like the look of trunking. Make a hole behind where the TV will be mounted and thread all cables through it. Make another below it and pull the cables through. You can neaten the holes you've made with cheap a plastic fitting. If you plan to do this, cut your holes the right size for the fittings.
Buy cables that are longer than you suspect you'll need. You don't want to pass the cables through only to realise they aren't long enough to reach your socket.
If this all sounds a bit daunting you can always get a professional in to do it for you.
Use our Trusted Traders website to find a Which?-approved fitter to mount your TV.