Integrated tumble dryers are few and far between. At the time of writing there are just three integrated tumble dryers for sale at Ao.com and John Lewis only has one.
But even with so little choice you could still end up buying a dud. This guide will tell you:
Not as many people can or want to have an integrated tumble dryer which means that manufacturers make fewer models.
At the time of writing we’ve reviewed six integrated tumble dryers from the following brands: White Knight, Baumatic, Hoover, Candy and Montpellier.
Integrated appliances generally cost more than their freestanding equivalents.
But we've reviewed integrated tumble dryers that cost less than £300.
Integrated tumble dryers are designed to be incorporated into built-in kitchens. They are installed within the units and typically sit behind a cupboard door. This keeps protruding features hidden from view, making the kitchen super streamlined.
You might have also heard the terms built-in, semi-integrated and fully integrated.
The main difference between a condenser and vented tumble dryer is how they extract water from the machine.
Note: These measurements may not take into account protruding features or controls. Always check your product manual or ask the retailer for exact measurements before buying.
It’s important to note that the dimensions of your tumble dryer don’t reflect the drum capacity. Just because it's big in size doesn't mean it can wash a large load of laundry, too. You should always check the drum capacity before buying to make sure it suits your laundry needs.
Integrated tumble dryers typically come with 6kg or 7kg drums, but can be as small as 3kg and as large as 10kg.
The average capacity measurements also differ depending on the program you’re using. For example, the estimates above are calculated using a cotton cycle, but the capacity on a synthetics cycle will typically be lower.
Fitting an integrated appliance is typically more complicated than installing a freestanding model. This is because you have to attach the cupboard in front and remove and replace the kitchen plinth.
The process will also differ depending on whether you have a vented or condenser model. A condenser model only needs to be plugged in before attaching the surrounding units, while a vented model would need a hole to be drilled in the back wall for the hose.
If you have a condenser model or you are just replacing an old vented machine, you could follow the instructions in your manual to fit the front unit and set the plinth.
However, if DIY is not your thing, we would recommend calling in a professional – warranties will not cover incorrect installation.
Professionals will charge more to install an integrated appliance than for a freestanding model because of the complexity of the job. Instead of just connecting the appliance they also have to fit the door and reattach the plinth.
Many retailers offer an installation service when you buy a new model. For example, Currys PC World charges £90 to install an integrated tumble dryer.
John Lewis also offers an installation service for £90 but states that it will only fit a vented model when there is an existing wall duct.
Our research shows that the average scores for integrated and freestanding versions we’ve reviewed are on par. However, it’s important to note that there are far more freestanding models than integrated ones on our site, so comparing the two is not conclusive.
Problems also tend to arise for specific dryers rather than types. Check individual reviews before buying so you're not left with a dud.
Vented tumble dryers are typically less energy efficient than other tumble dryer types. In fact, running costs can be as much as halved if you opt for a heat pump dryer.
Heat pump dryers are the most efficient of all. They are rated from A to A+++ for energy and can cost as little as £23 a year to run.
The running cost is based on drying three cotton cupboard-dry loads a week, for a year.
If our testing reveals a machine that is a Best Buy with five stars for energy efficiency, it will receive an ‘Energy Saver’ logo.
Yes, it's possible to replace an old integrated tumble dryer with a new one but you'd need to either find a new model with identical dimensions or rework your kitchen units.
You would also need to be extra careful when removing the door to ensure you can reuse it or you'll also find yourself searching for a second matching door.
Semi-integrated models would be even harder to replace. It would mean finding a new model with exactly the same-sized control panel – a feature that is not a standardised size or shape - as well as checking the dimensions.
Never try forcing a freestanding model into a kitchen unit either. Forcing a cupboard door on the front could cause damage that would not be covered by your warranty.