How to clean an iron
Find out how to clean an iron quickly and easily, including how to descale your iron.
Knowing how to clean an iron is essential. Irons that are clogged up with limescale or have sticky residues on the bottom can make ironing harder work, and even damage your clothes.
While most of us don’t descale our iron as often as we should, when limescale builds up it can make your iron less steamy. This mean it will take even longer to get through your laundry pile.
Leaving sticky gunk on the soleplate can stop it gliding smoothly, and even cause it to catch on fabrics or leave behind stains.
In this article:
- How to clean the bottom of an iron
- How to remove burnt or melted fabric from an iron
- How to descale an iron
- Which irons are easiest to descale?
- How often do I need to clean my iron?
- Choosing the best steam iron
Need a new iron? Head straight to the best steam irons to see which models we recommend.
How to clean the bottom of an iron
If you have sticky gunk or residue on the base of your iron (the soleplate), cleaning it off will help your iron glide more smoothly and avoid damaging or staining your clothes.
To clean the bottom of an iron:
- Put the iron on the lowest heat setting
- Gently wipe a soft, damp cloth over it to remove any stickiness
- Use a damp cotton bud to clean in and around the steam vents
- Let it dry thoroughly before using it to iron.
Always check the user manual before cleaning, as soleplates are made with different materials and some models come with specific recommendations.
Make sure you use a soft cloth, rather than a harsh or abrasive cleaning pad, and wipe gently to avoid scratching it. Scratched soleplates can catch and damage fabrics.
It's also worth bearing in mind that no matter how careful you are, some soleplates are far more likely to pick up scratches than others. We put each iron through our tough scratch tests to see which are likely to stay in good condition the longest.
Only irons that can shine in our tough tests are good enough to make it onto our list of the best steam irons.
Burnt or melted fabric fibres can be difficult to remove from an iron. But if you leave it on your iron's soleplate, it may damage or stain your clothes. Unless your user manual recommends otherwise, follow our three steps below.
To remove burnt fabric from the bottom of your iron:
- Turn the iron on to a medium heat setting
- Dampen a cotton cloth or towel
- Pass the iron over the damp material for a few minutes to draw the fibre off the soleplate.
Most irons come with a built-in cleaning system to descale an iron. The type of cleaning system varies between models:
- Some irons use pressurised steam to blast limescale out through the vents
- Some connect to your tap to flush out the system
- Others collect limescale in a ‘chamber’ or ‘collector’ that can be easily removed and emptied.
When limescale builds up inside your iron, it can clog up the steam vents and drastically lower steam levels. So you'll have to put in more of the effort yourself to get rid of creases.
Irons that are full up with limescale can also spit out limescale and leave white or brown chalky marks behind on your clothes.
When we asked more than 2,700 people what causes problems in their steam irons, limescale was responsible for almost half the problems. So it's worth finding an iron with an effective descaling system.
We reveal which steam iron brands you can trust and which are more likely to have problems - top steam iron brands.
*(Online survey of 2,799 Which? members, April 2019.)
New models often boast shiny new descaling systems, but it’s worth doing your research before you buy. Some systems are far fiddlier and more time consuming than others.
While some ‘self clean’ in less than two minutes, the worst demand you hold the iron over the sink for 15 minutes or even soak parts in lemon juice for four hours.
Our tests have revealed the more demanding descaling systems aren’t always the most effective at limiting the effects of limescale on your iron.
We’ve found some really simple-to-use descaling systems do a perfect job of getting steam power back to its original level. We’ve also found some with really complicated systems that actually clog up the system more, which further reduces steam power.
In general, more expensive irons tend to be easier to descale, and their cleaning systems are more effective at restoring steam levels. Steam generators also tend to have cleaning systems that are more effective and easier to operate. But we’ve also found some brilliant budget steam irons that score highly for both.
See our expert pick of the top five cheap steam irons.
Manufacturers generally recommend descaling between every one to three months. However, others ask you to do this as frequently as every two weeks.
In reality, we know most people don’t descale their iron as often as this – in fact almost half of us never bother according to a March 2019 survey of over 1,100 Which? members.
Our tests have found that some irons are better than coping with limescale than others. With one of our best steam irons you might be able to get away with descaling less regularly. But with others you’ll notice steam levels dropping off drastically after a few months’ use and will need to clean it regularly to keep it performing at its best.
If you can, it’s always best to follow manufacturer’s guidelines if you want to keep your iron within its warranty – so check the manual before you buy if you want an iron that doesn’t require regular cleaning.
Mandatory iron cleaning systems
Some irons have mandatory cleaning systems - the iron will stop producing steam until it’s been cleaned.
This can be a handy nudge for the procrastinators among us, but it could also be a pain if you’re hurrying to get a shirt straight while rushing out the door in the morning.
Our tests found that mandatory cleaning systems are not always that effective at keeping limescale at bay, so it’s worth checking our steam iron reviews before you buy.
For more advice on what to look for when buying a new iron, head to how to buy the best steam iron.
If you’re happy to spend a bit more and are looking for something a bit more powerful, a steam generator iron will do a fantastic job - provided you buy the right model. We've got expert advice on what you need to know before you buy, plus we reveal the our pick of the best models - see which steam generator irons.